Keyboard ALT + g to toggle grid overlay
AutoCAD for Mac Shortcuts & Hotkey Guide
Work faster and more efficiently by using the AutoCAD for Mac shortcuts below. You can find a downloadable list of shortcuts and commands in the AutoCAD for Mac Keyboard Shortcuts PDF.
AutoCAD for Mac Shortcuts & Hotkey Guide
Work faster and more efficiently by using the AutoCAD for Mac shortcuts below. You can find a downloadable list of shortcuts and commands in the AutoCAD for Mac Keyboard Shortcuts PDF.
One-Key Shortcuts
Below, you'll find the AutoCAD for Mac one-key shortcuts. Click on the image for a larger view.
;void(0);)
Toggles and Screen Management
Toggle General Features
| Cmd-1 | Opens or closes the Tool Sets palette |
| Cmd-2 | Opens or closes the Content palette |
| Cmd-3 | Opens or closes the command window |
| Cmd-4 | Opens or closes the Layers palette |
| Cmd-5 | Opens or closes the Properties Inspector palette |
| Cmd-6 | Toggles the status bar |
| Cmd-7 | Opens or closes the Reference Manager palette |
| Cmd-8 | Opens or closes the Project Manager palette |
| Cmd-9 | Opens or closes the Material Browser palette |
| Cmd-/ | Launches the online help (browser) |
| Cmd-E | Displays the Export Data dialog |
| Cmd-F | Displays the Find and Replace dialog |
| Cmd-G | Groups selected objects |
| Cmd-I | Displays the Properties Inspector palette |
| Cmd-R | Regenerates the current viewport |
| Cmd-W | Closes the current drawing |
| Cmd-+ | Zooms in 2x |
| Cmd-- | Zooms out 0.5x |
| Cmd-, | Displays the Application Preferences dialog |
| Cmd-. | Displays the Quick View dialog |
| Shift-Cmd-C | Displays the color palette |
| Shift-Cmd-; | Displays the Check Spelling dialog |
Toggles
| Fn-F1 or Cmd-/ | Displays Help |
| Fn-F2 | Expands or collapses the display of the Command Window |
| Fn-F3 or Ctrl-F or rl-Shift-F |
Toggles object snap mode on and off |
| Fn-F4 | Toggles 3D object snap mode on and off |
| Fn-F5 | Toggles isoplane mode |
| Fn-F6 or Cmd-D or Ctrl-D |
Toggles Dynamic UCS mode on and off |
| Fn-F7 or Ctrl-G or Ctrl-Shift-G |
Toggles grid display on and off |
| Fn-F8 or Cmd-L or Shift-Cmd-O |
Toggles ortho mode on and off |
| Fn-F9 or Cmd-B or Ctrl-B |
Toggles ortho mode on and off |
| Fn-F10 or Cmd-U or Ctrl-U |
Toggles polar tracking on and off |
| Shift-Cmd-D | Toggles Dynamic Input mode on and off |
| Shift-Cmd-F | Toggles Clean Screen mode on and off |
| Shift-Cmd-I or Shift-Ctrl-I |
Toggles Infer Constraints mode on and off |
| Shift-Cmd-T | Toggles object snap tracking on and off |
| Ctrl-I | Toggles the coordinates display mode |
| Ctrl-W or Ctrl-Shift-W |
Toggles Selection Cycling |
| Ctrl-H | Toggles PICKSTYLE on and off |
| Shift-Cmd-H | Toggles the display of all palettes on or off |
Manage Workflow
| Cmd-C or Ctrl-C | Copies the selected objects to the Clipboard |
| Cmd-E | Displays the Export Data dialog box |
| Cmd-F | Displays the Find and Replace dialog box |
| Cmd-V or Ctrl-V | Pastes the contents of the Clipboard to the current layout |
| Cmd-X or Ctrl-X | Removes the selected from the drawing and adds them to the Clipboard |
| Cmd-Y or Ctrl-Y or Shift-Cmd-Z |
Reverses the most recent undo |
| Cmd-Z or Ctrl-Z | Undoes the most recent action |
| Ctrl-[ or Ctrl-\ | Cancels |
| Shift-Cmd-; | Displays the Check Spelling dialog box |
| Ctrl-J or Ctrl-M | Repeats the previous command |
| Shift-Ctrl-C | Copies the selected objects with a specified base point |
| Shift-Ctrl-E | Implied Face Extrusion (PressPull) |
Manage Drawings
| Cmd-A or Ctrl-A | Selects all objects in the current layout |
| Cmd-G | Groups the selected objects |
| Cmd-H | Hides AutoCAD window |
| Cmd-M | Minimizes the current drawing window |
| Cmd-N or Ctrl-N | Creates new drawing |
| Cmd-O or Ctrl-O | Opens drawing |
| Cmd-P or Ctrl-P | Displays the Print/Plot dialog box |
| Cmd-Q or Ctrl-Q | Closes the program |
| Cmd-R | Regenerates the current viewport |
| Cmd-S or Ctrl-S | Saves the current drawing. If the drawing has not been saved yet, the Save Drawing As dialog box is displayed |
| Cmd-W | Closes the current drawing |
| Cmd-Opt-W | Closes all drawings |
| Shift-Cmd-G | Ungroups the selected group |
| Shift-Cmd-P | Displays the Page Setup Manager |
| Shift-Cmd-R | Regenerates all viewports in the current layout |
| Shift-Cmd-S or Shift-Ctrl-S |
Displays the Save Drawing As dialog box |
| Ctrl-A | Selects all objects in the current layout |
| Cmd-Opt-M | Minimizes all |
Manage Screen
| Fn-F11 | Hides all open windows |
| Fn-F12 | Display dashboard |
| Cmd-1 or Ctrl-3 | Opens or closes the Tool Sets palette |
| Cmd-2 or Ctrl-2 | Opens or closes the Content palette on and off |
| Cmd-3 or Ctrl-9 | Shows or hides the Command Window |
| Cmd-4 | Opens or closes the Layers palette |
| Cmd-5 or Cmd-I or Ctrl-1 |
Opens or closes the Properties Inspector palette |
| Cmd-6 | Toggles the display of the status bar on and off |
| Cmd-7 | Opens or closes the Reference Manager palette |
| Cmd-8 or Ctrl-4 | Project Manager |
| Cmd-9 | Material Browser |
| Cmd-0 or Ctrl-0 | Toggles Clean Screen on and off |
| Cmd-- | Zooms out |
| Cmd-+ | Zooms in |
| Cmd-, | Options |
| Cmd-. or Shift- Cmd-. |
Displays the Quick View dialog box |
| Shift-Cmd-C | Displays the Color Palette. Select a new color to make it the current color for new objects |
| Cmd-Opt-H | Hides the Windows of all other applications |
| Cmd-Opt-I | Properties |
| Cmd-Opt-T | Toggles Toolset Palette |
A, B, C
A
| A | ARC / Creates an arc |
| AA | AREA / Calculates the area and perimeter of objects or of defined areas |
| AC | BACTION / Adds an action to a dynamic block definition |
| AR | ARRAY / Creates multiple copies of objects in a pattern |
| ATE | ATTEDIT / Changes attribute information in a block |
| ATI | ATTIPEDIT / Changes the textual content of an attribute within a block |
| ATTE | ATTEDIT / Changes attribute information in a block |
B
| B | BLOCK / Creates a block definition from selected objects |
| BC | BCLOSE / Closes the Block Editor |
| BE | BEDIT / Opens the block definition in the Block Editor |
| BH | HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill |
| BLENDSRF | SURFBLEND / Creates a transition surface between two existing surfaces or solids |
| BO | BOUNDARY / Creates a region or a polyline from an enclosed area |
| BPUB | UBLISH / Publishes a set of drawings to PDF files or printers |
| BR | BREAK / Breaks the selected object between two points |
| BS | BSAVE / Saves the current block definition |
| BVS | VSTATE / Creates, sets, or deletes a visibility state in a dynamic block |
C
| C | CIRCLE / Creates a circle |
| CBAR | CONSTRAINTBAR / A toolbar-like UI element that displays the available geometric constraints on an object |
| CH | ROPERTIES / Controls properties of existing objects |
| CHA | CHAMFER / Bevels the edges of objects |
| CL | COMMANDLINE / Displays the Command Line window |
| CLIPVIEWPORT | VPCLIP / Clips layout viewport objects and reshapes the viewport border |
| CO | COPY / Copies objects a specified distance in a specified direction |
| COL | COLOR / Sets the color for new objects |
| COMMANDHIDE | COMMANDLINEHIDE / Hides the Command Line window |
| CREASE | MESHCREASE / Selects mesh subojects to crease |
| CREATESOLID | SURFSCULPT / Converts a group of surfaces that enclose a watertight region to a 3D solid |
| CSETTINGS | CONSTRAINTSETTINGS / Controls the display of geometric constraints on constraint bars |
| CT | CTABLESTYLE / Sets the name of the current table style |
| CUBE | NAVVCUBE / Controls the visibility and display properties of the ViewCube tool |
| CURVATURE ANALYSIS | ANALYSISCURVATURE/ Evaluates areas of high and low surface curvature by displaying a color gradient |
| CUSTOMIZE | CUI/ Manages the customized user interface elements |
| CYL | CYLINDER / Creates a 3D solid cylinder |
D, E, F
D
| D | DIMSTYLE / Creates and modifies dimension styles |
| DAL | DIMALIGNED/ Creates an aligned linear dimension |
| DAN | DIMANGULAR/ Creates an angular dimension |
| DAR | DIMARC/ Creates an arc length dimension |
| DBA | DIMBASELINE/ Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension |
| DCE | DIMCENTER / Creates the center mark or the centerlines of circles and arcs |
| DCO | DIMCONTINUE / Creates a dimension that starts from an extension line of a previously created dimension |
| DCON | DIMCONSTRAINT / Applies dimensional constraints to selected objects or points on objects |
| DDA | DIMDISASSOCIATE / Removes associativity from selected dimensions |
| DDI | DIMDIAMETER / Creates a diameter dimension for a circle or an arc |
| DDPTYPE | PTYPE/ Specifies the display style and size of point objects |
| DDVPOINT | VPOINT/ Sets the viewing direction for a 3D visualization of the drawing |
| DED | DIMEDIT / Edits dimension text and extension lines |
| DELCON | DELCONSTRAINT/ Removes all geometric and dimensional constraints from a selection set of objects |
| DI | DIST / Measures the distance and angle between two points |
| DIV | DIVIDE / Creates evenly spaced point objects or blocks along the length or perimeter of an object |
| DJL | DIMJOGLINE / Adds or removes a jog line on a linear or aligned dimension |
| DJO | DIMJOGGED / Creates jogged dimensions for circles and arcs |
| DL | DATALINK / The Data Link dialog box is displayed |
| DLI | DIMLINEAR/ Creates a linear dimension |
| DLU | DATALINKUPDATE / Updates data to or from an established external data link |
| DO | DONUT / Creates a filled circle or a wide ring |
| DOR | DIMORDINATE / Creates ordinate dimensions |
| DOV | DIMOVERRIDE / Controls overrides of system variables used in selected dimensions |
| DR | DRAWORDER / Changes the draw order of images and other objects |
| DRA | DIMRADIUS / Creates a radius dimension for a circle or an arc |
| DRAFTANGLE ANALYSIS | ANALYSISDRAFTANGLE/ Evaluates whether a model has adequate draft between a part and its mold |
| DRE | DIMREASSOCIATE / Associates or re-associates selected dimensions to objects or points on objects |
| DRM | DRAWINGRECOVERY / Displays a list of drawing files that can be recovered after a program or system failure |
| DS | DSETTINGS / Sets grid and snap, polar and object snap tracking, object snap modes, Dynamic Input, and Quick Properties |
| DT | TEXT / Creates a single-line text object |
| DV | DVIEW / Defines parallel projection or perspective views by using a camera and target |
E
| E | ERASE / Removes objects from a drawing |
| ED | DDEDIT / Edits single-line text, dimension text, attribute definitions, and feature control frames |
| EL | ELLIPSE / Creates an ellipse or an elliptical arc |
| ER | EXTERNALREFERENCES /Opens the External References palette |
| EX | EXTEND /Extends objects to meet the edges of other objects |
| EXIT | QUIT / Exits the program |
| EXP | EXPORT / Saves the objects in a drawing to a different file format |
| EXT | EXTRUDE / Extends the dimensions of a 2D object or 3D face into 3D space |
| EXTENDSRF | SURFEXTEND /Creates new surface by extending existing surface |
F
| F | FILLET / Rounds and fillets the edges of objects |
| FILLETSRF | FILTER /Creates new surface by filleting existing surface |
| FREEPOINT | POINTLIGHT / Creates lighting effect that radiates in all directions from its location |
| FSHOT | FLATSHOT /Creates a 2D representation of all 3D objects based on the current view |
| FULLSCREEN | CLEANSCREENON / Clears the screen of the menu bar and all palettes |
| FULLSCREENOFF | CLEANSCREENOFF / Restores the state of display before CLEANSCREENON was used |
G, H, I
G
| G | GROUP /Creates and manages saved sets of objects called groups |
| GCON | GEOCONSTRAINT /Fills an enclosed area or selected objects with a gradient fill |
| GD | GRADIENT / Fills an enclosed area or selected objects with a gradient fill |
| GENERATESECTION | SECTIONPLANETOBLOCK / Saves 2D and 3D sections as blocks |
H
| H | HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill |
| HB | HATCHTOBACK /Sets the draw order for all hatches in the drawing to be behind all other objects |
| HE | HATCHEDIT/ Modifies an existing hatch or fill |
| HI | HIDE / Regenerates a 3D wireframe model with hidden lines suppressed |
I
| I | INSERT / Inserts a block or drawing into the current drawing |
| IAD | IMAGEADJUST / Controls the image display of the brightness, contrast, and fade values of images |
| IAT | IMAGEATTACH / Inserts a reference to an image file |
| ICL | IMAGECLIP / Crops the display of a selected image to a specified boundary |
| ID | ID / Displays the UCS coordinate values of a specified location |
| IM | IMAGE / Displays the External References palette |
| IMP | IMPORT / Imports files of different formats into the current drawing |
| IN | INTERSECT / Creates a 3D solid, surface, or 2D region from overlapping solids, surfaces, or regions |
| INF | INTERFERE / Creates a temporary 3D solid from the interferences between two sets of selected 3D solids |
| ISOLATE | ISOLATEOBJECTS / Displays selected objects across layers; unselected objects are hidden |
J, K, L
J
| J | JOIN / Joins similar objects to form a single, unbroken object |
| JOG | DIMJOGGED / Creates jogged dimensions for circles and arcs |
| JOGSECTION | SECTIONPLANEJOG / Creates a section plane that has multiple segments |
K
L
| L | LINE / Creates straight line segments |
| LA | LAYER / Manages layers and layer properties |
| LAS | LAYERSTATE / Saves, restores, and manages named layer states |
| LAYERFREEZE | LAYFRZ / Freezes the layer of the selected object |
| LAYERHIDE | LAYOFF / Turns off the layer of a selected object |
| LAYERI SOLATE | LAYISO / Hides or locks all layers except those of the selected objects |
| LAYERL OCK | LAYLCK / Locks the layer of a selected object |
| LAYERMAKE CURRENT | LAYMCUR / Sets the current layer to that of a selected object |
| LAYERMATCH | LAYMCH / Changes the layer of a selected object to match the destination layer |
| LAYERUNISOLATE | LAYUNISO / Restores all layers that were hidden or locked with the LAYISO command |
| LAYERUNLOCK | LAYULK / Unlocks the layer of a selected object |
| LE | QLEADER / Creates a leader and leader annotation |
| LEN | LENGTHEN / Changes the length of objects and the included angle of arcs |
| LESS | MESHSMOOTHLESS / Decreases the level of smoothness for mesh objects by one level |
| LI | LIST / Displays property data for selected objects |
| LO | LAYOUT / Creates and modifies drawing layout tabs |
| LT | LINETYPE / Loads, sets, and modifies linetypes |
| LTS | LTSCALE / Changes the scale factor of linetypes for all objects in a drawing |
| LW | LWEIGHT / Sets the current lineweight, lineweight display options, and lineweight units |
M, N, O
M
| M | MOVE / Moves objects a specified distance in a specified direction |
| MA | MATCHPROP / Applies the properties of a selected object to other objects |
| ME | JOIN / Joins similar objects to form a single, unbroken object |
| MEA | MEASUREGEOM / Measures the distance, radius, angle, area, and volume of selected objects or sequence of points |
| MI | MIRROR / Creates a mirrored copy of selected objects |
| ML | MLINE / Creates multiple parallel lines |
| MLA | MLEADERALIGN / Aligns and spaces selected multileader objects |
| MLC | MLEADERCOLLECT / Organizes selected multileaders that contain blocks into rows or columns, and displays the result with a single leader |
| MLD | MLEADER / Creates a multileader object |
| MLE | MLEADEREDIT / Adds leader lines to, or removes leader lines from, a multileader object |
| MLS | MLEADERSTYLE / Creates and modifies multileader styles |
| MO | PROPERTIES / Controls properties of existing objects |
| MORE | MESHSMOOTHMORE / Increases the level of smoothness for mesh objects by one level |
| MS | MSPACE / Switches from paper space to a model space viewport |
| MT | MTEXT / Creates a multiline text object |
| MV | MVIEW / Creates and controls layout viewports |
N
| NETWORKSRF | SURFNETWORK / Creates non-planar surfaces in the space between edge subobjects, splines, and other 2D and 3D curves |
| NEWPROJECT | NEWSHEETSET / Creates a new project data (DST) file that manages drawing layouts, file paths, and project information |
| NVIEW | VIEW / Saves and restores named views, camera views, layout views, and preset views |
O
| O | OFFSET / Creates concentric circles, parallel lines, and parallel curves |
| OBJECTSELECTION LIMIT | OPTIONS / Customizes the program settings |
| OFFSETSRF | SURFOFFSET/ Creates a parallel surface or solid by setting an offset distance from a surface |
| OP | OPTIONS / Customizes the program settings |
| OPENPROJECT | SURFOFFSET / Creates a parallel surface or solid by setting an offset distance from a surface |
| ORBIT | 3DORBIT / Rotates the view in 3D space, but constrained to horizontal and vertical orbit only |
| OS | OSNAP / Sets running object snap modes |
P, Q, R
P
| P | PAN / Moves the view planar to the screen |
| PA | PASTECLIP / Pastes objects from the Clipboard into the current drawing |
| PALETTE SCLOSE | TOOLSETSCLOSE/ Closes the tool palettes window |
| PAR | PARAMETERS / Controls the associative parameters used in the drawing |
| PARAM | BPARAMETER / Adds a parameter with grips to a dynamic block definition |
| PATCH | SURFPATCH / Creates a new surface by fitting a cap over a surface edge that forms a closed loop |
| PE | PEDIT/ Edits polylines and 3D polygon meshes |
| PGP | ALIASEDIT / Creates, modifies, and deletes AutoCAD command aliases. |
| PL | PLINE / Creates a 2D polyline |
| PM | SHEETSET / Opens the Project Manager |
| PMAUTOOPEN | SSMAUTOOPEN / Controls the display behavior of the Project Manager when a drawing associated with a layout is opened. |
| PMFOUND | SSFOUND / Displays the path and file name if a search for a project file is successful |
| PMHIDE | SHEETSETHIDE / Closes the Project Manager |
| PMLAYOUT STATUS | SMSHEETSTATUS / Controls how the status data in a project is refreshed |
| PMLOCATE | SSLOCATE / Controls whether the project associated with a drawing is located and opened when the drawing is opened |
| PMPOLLTIME | SSMPOLLTIME / Controls the time interval between automatic refreshes of the status data in a project |
| PMSTATE | SSMSTATE / Indicates whether the Project Manager window is open or closed |
| PO | POINT / Creates a point object |
| POFF | HIDEPALETTES / Hides currently displayed palettes (including the command line) |
| POINTOFF | CVHIDE / Hides the control vertices for both NURBS surfaces and curves |
| POINTON | CVSHOW / Displays the control vertices for both NURBS surfaces and curves |
| POL | POLYGON / Creates an equilateral closed polyline |
| PON | SHOWPALETTES / Restores the display of hidden palettes |
| PR | PROPERTIES / Displays Properties palette |
| PRCLOSE | PROPERTIESCLOSE / Closes the Properties Inspector palette |
| PRE | PREVIEW / Displays the drawing as it will be plotted |
| PREF | OPTIONS / Customizes the program settings |
| PLOT / Plots a drawing to a plotter, printer, or file | |
| PS | PSPACE / Switches from a model space viewport to paper space |
| PSOLID | POLYSOLID / Creates a 3D wall-like polysolid |
| PU | PURGE / Removes unused items, such as block definitions and layers, from the drawing |
| PYR | PYRAMID / Creates a 3D solid pyramid |
Q
| QSAVE | QSAVE / Saves the current drawing |
| QVD | QUICKVIEW / Displays a list of all open drawings, and the layouts contained in the current drawing or the selected drawing when more than one drawing is open |
R
| R | REDRAW / Refreshes the display in the current viewport |
| RA | REDRAWALL / Refreshes the display in all viewports |
| RE | REGEN / Regenerates the entire drawing from the current viewport |
| REA | REGENALL / Regenerates the drawing and refreshes all viewports |
| REBUILD | CVREBUILD/ Rebuilds the shape of NURBS surfaces and curves |
| REC | RECTANG / Creates a rectangular polyline |
| REFINE | MESHREFINE/ Refines mesh objects |
| REG | REGION / Converts an object that encloses an area into a region object |
| REN | RENAME / Changes the names assigned to items such as layers and dimension styles |
| REV | REVOLVE / Creates a 3D solid or surface by sweeping a 2D object around an axis |
| RO | ROTATE / Rotates objects around a base point |
| RR | RENDER / Creates a photorealistic or realistically shaded image of a 3D solid or surface model |
| RW | RENDERWIN / Displays the Render window without starting a rendering operation |
S, T, U
S
| S | STRETCH / Stretches objects crossed by a selection window or polygon |
| SC | SCALE / Enlarges or reduces selected objects, keeping the proportions of the object the same after scaling |
| SCR | SCRIPT / Executes a sequence of commands from a script file |
| SE | DSETTINGS/ Sets grid and snap, polar and object snap tracking, object snap modes, and Dynamic Input |
| SEC | SECTION / Uses the intersection of a plane and solids, surfaces, or mesh to create a region |
| SELECTIONLIMIT | PROPOBJLIMIT / Limits the number of objects that can be changed at one time with the Properties Inspector |
| SET | SETVAR / Lists or changes the values of system variables |
| SHA | SHADEMODE / Starts the VSCURRENT command |
| SL | SLICE / Creates new 3D solids and surfaces by slicing, or dividing, existing objects |
| SMOOTH | MESHSMOOTH / Converts 3D solids, surfaces, and legacy mesh objects to the enhanced mesh object for smoothing, refinement, creasing, and splitting |
| SN | SNAP / Restricts cursor movement to specified intervals |
| SO | SOLID / Creates solid-filled triangles and quadrilaterals |
| SP | SPELL / Checks spelling in a drawing |
| SPE | SPLINEDIT / Edits a spline or spline-fit polyline |
| SPL | SPLINE / Creates a smooth curve that passes through or near specified points |
| SPLANE | SECTIONPLANE / Creates a section object that acts as a cutting plane through 3D objects |
| SPLAY | SECTIONPLANE/ Creates one or more section objects and places them throughout a 3D model |
| SPLIT | MESHSPLIT / Splits a mesh face into two faces |
| SSM | SHEETSET / Opens the Sheet Set Manager |
| ST | STYLE / Creates, modifies, or specifies text styles |
| SU | SUBTRACT / Combines selected 3D solids, surfaces, or 2D regions by subtraction |
T
| T | MTEXT / Creates a multiline text object |
| TA | TEXTALIGN / Aligns multiple text objects vertically, horizontally, or obliquely |
| TB | TABLE / Creates an empty table object |
| TEDIT | TEXTEDIT / Edits a dimensional constraint, dimension, or text object |
| TEXTSTYLE EDIT | STYLE / Creates, modifies, or specifies text styles |
| TH | THICKNESS / Sets the default 3D thickness property when creating 2D geometric objects |
| TI | TILEMODE / Controls whether paper space can be accessed |
| TO | TOOLSETS/ Opens the Tool Sets palette |
| TOL | TOLERANCE / Creates geometric tolerances contained in a feature control frame |
| TOR | TORUS / Creates a donut-shaped 3D solid |
| TP | CONTENT / Opens the Content palette |
| TR | TRIM / Trims objects to meet the edges of other objects |
U
| U | UNDO/ Reverses the most recent action |
| UC | UCSMAN / Manages defined user coordinate systems |
| UN | UNITS / Controls coordinate and angle display formats and precision |
| UNCREASE | MESHUNCREASE / Removes crease from selected mesh object |
| UNHIDE | UNISOLATEOBJECTS / Displays objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command |
| UNI | UNION / Unions two solid or two region objects |
V, W, X
V
| V | VIEW / Saves and restores named views, camera views, layout views, and preset views |
| VIEWPORTCLIP | VPCLIP / Clips layout viewport objects and reshapes the viewport border |
| VP | VPOINT / Sets the viewing direction for a 3D visualization of the drawing |
| VPLAY | VIEWPLAY / Plays the animation associated to a named view |
| VPORT | VPORTS / Creates multiple viewports in model space or paper space |
| VS | VSCURRENT/ Sets the visual style in the current viewport |
W
| W | WBLOCK / Writes objects or a block to a new drawing file |
| WE | WEDGE / Creates a 3D solid wedge |
| WHEEL | NAVSWHEEL / Displays a wheel that contains a collection of view navigation tools |
X
| X | EXPLODE / Breaks a compound object into its component objects |
| XA | XATTACH / Inserts a DWG file as an external reference (xref) |
| XB | XBIND / Binds one or more definitions of named objects in an xref to the current drawing |
| XC | XCLIP / Crops the display of a selected external reference or block reference to a specified boundary |
| XL | XLINE / Creates a line of infinite length |
| XR | XREF / Starts the EXTERNALREFERENCES command |
Y, Z, #
Y
Z
| Z | ZOOM / Increases or decreases the magnification of the view in the current viewport |
| ZEBRA | ANALYSISZEBRA / Projects stripes onto a 3D model to analyze surface continuity |
| ZIP | ETRANSMIT / Creates a Self-Extracting or Zipped Transmittal Package |
#
| 3A | 3DARRAY / Creates copies of objects arranged in a 3D pattern |
| 3AL | 3DALIGN / Aligns objects in 3D |
| 3DMIRROR | MIRROR3D / Mirrors objects across a specified mirroring plane |
| 3DO | 3DORBIT / Rotates the view in 3D space, but constrained to horizontal and vertical orbit only |
| 3F | 3DFACE / Creates a 3D polyface mesh by specifying each vertex; also can specify whether an edge segment is invisible |
| 3M | 3DMOVE / Moves selected objects along an axis or plane |
| 3P | 3DPOLY / Creates a 3D polyline |
| 3R | 3DROTATE / Rotates selected objects about a specified axis |
| ARU | ACTUSERINPUT / Pauses for user input in an action macro |
| 3S | 3DSCALE / Scales selected objects along a specified plane or axis, or uniformly along all 3 axes |
