• Fusion

Course 3 - Haas and Autodesk Fusion - Drafting, Soft Jaw Design, and Programming

Outline
1

Getting started

Module overview
Course overview
Get the software
Get the Haas tooling
Course resources
2

Introduction to CAD drawings

Module overview
Introduction to drawings and drafting
Create a basic print of the piston
Practice exercise
Challenge exercise
Module quiz
3

Create a soft jaw for caliper OP2

Module overview
Import soft jaw blanks and vise model
Create a soft jaw for the caliper front operation 2
Practice exercise
Challenge exercise
Module quiz
4

Create toolpaths to machine soft jaws

Module overview
Set up stock and WCS for soft jaw
Program toolpaths for soft jaw
Create an NC program and setup sheet for soft jaws
Practice exercise
Challenge exercise
Module quiz
5

Set up and machine soft jaws for OP2

Module overview
Set up soft jaws to be machined
Machine Operation 2
Module quiz
6

Course challenge exercise

Module overview
Course challenge
7

Final test

Module overview
Start your final test
  • Up next:Create an NC program and setup sheet for soft jaws

Program toolpaths for soft jaw

0:00 / 0:00

The "Finishing Passes" settings have been relocated to a new dedicated section under the "Passes" menu. You can now find them in the lower portion of the menu, clearly labeled as a separate section for easier access.

After completing this video, you'll be able to: 

  • Use Adaptive Clearing to remove rough stock on soft jaw.
  • Use 2D Contour to finish soft jaw geometry.
  • Use Chamfer to deburr soft jaws.

Video quiz

1. What information can Fusion 360 determine when selecting pockets for a 2D Adaptive Clearing toolpath?

Error: Select an answer

Error: 1/1 questions unanswered
1/1 questions unanswered

Step-by-step guide

It appears you don't have a PDF plugin for this browser.

  • Up next:Create an NC program and setup sheet for soft jaws

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}