Precision Machining Caliper – Back Soft Jaw

Course challenge: Create soft jaw models and toolpaths to machine them.

The following steps are required:

• Dataset Setup – Consider creating a Derive of the caliper back and setting up and  creating soft jaws.
• Tool Library Setup – Consider using the tools from the course, but make any changes  required for your shop.
• CAM Setup – Create Setups for machining the soft jaw geometry.
• Toolpath Creation – Create toolpaths to completely machine the soft jaws and ensure  all sharp edges have a chamfer toolpath to debur.
• Simulation – Validate material removal through simulation.
• Documentation – Create setup sheets and NC programs for each operation and validate G-code.
• Machine – Set up and machine your parts, validating tool feeds/speeds, fixturing, and  order of operations.
• Refine – Even if you don’t plan on machining multiple parts it’s a good idea to take  notes and refine the CAM program