Design for Manufacturing Professional Certification Prep

Outline

Pre-test

Before you begin this course, test your skills by taking the following assessment to see where you stand. Keep track of your incorrect answers to know which skills you should study. You'll have a chance to take this same practice test again at the end of the course to see how you've improved.

All questions must be answered to submit your assessment.

Pre-test

37 questions

1. A mechanical engineer has created a part and produced a cloud render for it in the Render workspace. The engineer would like to create a render each time a change is made to the design and saved in an attempt to document the design process. How can the engineer accomplish this by automatically creating renders for each saved change?

Drag and drop a previously configured render in the “Render on Save” tab of the Rendering Gallery to automatically generate renders
The engineer must manually create the renders as there is no such automatic function
The engineer must select the Auto-Render option by opening a previously configured render in the Rendering Gallery
The engineer must select the “Post-processing” option on a previously configured render in the Rendering Gallery and select “Render on Save”

Error: Select an answer

2.
A Mechanical Engineer is determining optimal setup orientations for a part that is to be milled on a 2.5 axis CNC machine. For the part pictured in the exhibit, which numbered region would have a red colorization if an Accessibility Analysis is performed using the XY plane as the direction?

Region 4
Region 1
Region 3
Region 2

Error: Select an answer

3. An engineer is transforming components in an assembly in the Animation workspace. Which of the following workflows will enable the engineer to ensure that each transformation is recorded as its own segment such that they can be modified at a later time?

With the Transform tool active, select the component(s) of interest and enter each numerical transformation followed by a comma to segment them
With the Transform tool active, select the component(s) of interest and toggle the “Split Transforms” option prior to moving them
With the Transform tool active, select the component(s) of interest and toggle the “Trail Line Visibility” option prior to moving them
This functionality is not possible, all consecutive movements on a selection of components will be recorded as a single operation

Error: Select an answer

4. A mechanical engineer creates a Cylinder primitive using the Form toolset and is attempting to connect a sink drain to the outlet. When using Edit Form to rotate the primitive and extrude, undesired distortions appear. Which workflow in the Form toolset is better suited for this application?

Create a 3D spline that connects the start and end points and use the Revolve tool to create the tube
Create a 3D spline that connects the start and end points and use the Thicken tool to turn the sketch into the tube.
Create a 3D spline that connects the start and end points and use the Pipe tool to create the tube.
There is no alternative to using the Cylinder primitive in conjunction with Edit Form

Error: Select an answer

5. A mechanical engineer is designing a part that will have several intricate geometries and will be subject to high temperature environments. The part itself will not be encountering any significant loading during operation. Which of the following additive manufacturing process and material configurations is most reasonable to produce a high-resolution prototype of the described part with the desired properties?

DED with titanium alloy powder
SLM with aluminum powder
SLA with a high temp resin
FDM with PLA filament

Error: Select an answer

6.
What is the least number of setups that can be used to manufacture the part pictured in the exhibit using a 3-axis milling configuration?

3
1
More than 3
2

Error: Select an answer

7. When a user first opens the Render workspace for a design, which of the following is true of the assigned backdrop?

There is no backdrop in the Render workspace, only in the Animation workspace
The default backdrop is the same as that of the Design workspace and needs to be tuned for the render
The default backdrop is a solid color
The default backdrop is the last environment that was used in another render or the user is prompted to select the environment immediately upon opening the Render workspace

Error: Select an answer

8.
When working with the Form toolset in the Design workspace, a mechanical engineer creates a Cylinder primitive as shown in the exhibit. Which of the pictured Cylinder primitive dialogs corresponds to the form body?

Configuration 1
Configuration 2
Configuration 4
Configuration 3

Error: Select an answer

9.
A mechanical engineer is modeling a curved pipe using the Surface toolset in the Design workspace. The engineer has finalized the surface body of the pipe, as seen in Figure A of the exhibit and would like to convert it to a solid body as seen in Figure B. What tool in the Surface toolset can accomplish this?

Create > Extrude
Create > Convert to Solid
Create > Thicken
Modify > Press Pull

Error: Select an answer

10.
Refer to the selected region of the Form body in the Exhibit. When raising the selection 0.5cm using Edit Form, what option distinguishes outcome A from outcome B?

Outcome A was scaled up 0.5cm instead of outcome B which was translated up 0.5cm
Soft Modification was enabled when raising the selection for outcome B
An extrusion using the ALT key was made to create Outcome B
The boundaries outside the selection of outcome A were Frozen prior to raising it

Error: Select an answer

11. A mechanical engineer is creating a drawing for a drone assembly. The colleague requested that the drawing report mass information for all components, however when the engineer creates the Parts List table, there is no mass column. What should the engineer do?

Double-click on the table and enable the Mass column in the Parts List menu
Right-click on the table entry in the Browser and select Columns > Mass
The mass cannot be reported in a Parts List drawing, the engineer must report that data somewhere else
Right-click on the table and select Columns > Mass

Error: Select an answer

12.
Pictured in the exhibit is a Browser for a bracket mounting assembly. Which of the entities, if modified, will carry its changes to an externally linked design?

TI64 Unrestricted Outcome v1:1
Brace Mounts
Mount Plate
Construction Block: 1

Error: Select an answer

13.
A mechanical engineer would like to use an FDM additive manufacturing process to produce the geometry pictured in the exhibit. Which of the pictured orientations should the engineer select if they want no supports in the mount holes and minimal supports everywhere else?

Orientation 1
Orientation 2
Orientation 3
Orientation 4

Error: Select an answer

14.
What type of construction plane was used to create the plane shown in the exhibit?

Plane Through Spline
Plane Along Path
Offset Plane
Plane at Angle

Error: Select an answer

15. An engineer has animated the exploded view of a large assembly. The engineer would like to create the animations to return the components to their home positions but wants to ensure that the explosion animations remain independent. How can the engineer achieve this?

Create a New Storyboard > Auto-Assemble
Create a New Storyboard > Clean
The desired outcome is not possible; in the new storyboard, the components must be re-exploded while in the Scratch Zone then reverted while in the timeline
Create a New Storyboard > Start from end of previous

Error: Select an answer

16. A mechanical engineer is designing a drone for a competition in which the mass is the primary criteria. The engineer has completed the design and would like to assign the appropriate materials and check the mass of the drone. How should the engineer proceed?

(1) Assign a Physical Material to the component of interest (2) select Export for manufacturing in the Tools tab of the Design Workspace (3) select Utilities > Manage Materials to view the mass
(1) Assign an Appearance to the component of interest (2) right-click it in the Browser (3) select Properties to view the mass
(1) Assign a Physical Material to the component of interest (2) right-click it in the Browser (3) select Properties to view the mass
The mass of a design cannot be viewed; it must be manufactured and physically weighed

Error: Select an answer

17.
A mechanical engineer is designing a traffic cone and would like to define a parametric Extrude operation that uses the sketch pictured in Figure A of the exhibit to create the opening shown in Figure B. The parametric relationship should be able to update the operation if the height of the cone changes. Which of the pictured Extrude operation dialogs can accomplish this assuming any selected objects are the bottom base of the cone?

Select 2 answers below.

Configuration 5
Configuration 2
Configuration 1
Configuration 4
Configuration 3

Error: Select 2 answers

18. A mechanical engineer is creating geometry with several holes that will be used to mount it to a wall using bolts. Multiple hole sizes are added to regions of the part. The engineer is unsure of what bolt size is available in their shop but wants to get the design finalized before checking. What workflow will enable the engineer to add placeholder dimensions for all bolt sizes and quickly modify them once confirming available hardware?

Dimension one hole and apply a Fix/UnFix constraint to all other holes. Only the dimensioned hole will need to be changed to modify the remaining bolt sizes
Create a parameter for each unique bolt size and use it to dimension the holes. Once hardware dimensions are confirmed, modify parameter values.
Dimension all the holes individually with anticipated diameters and redefine them all after confirming hardware dimensions.
Dimension one hole and apply an equal constraint between the dimensioned hole and all other holes. Only the dimensioned hole will need to be changed to modify the remaining bolt sizes

Error: Select 2 answers

19. An engineer is creating several comments with snapshots in their design for a colleague. What functionality can be used to save the orientation of the part so that the engineer can return to the view if they accidentally orbit the model while making the comments?

Capturing the position of the model
Creating a Named View
Grounding the component in place
There is no such functionality

Error: Select 2 answers

20. A mechanical engineer is attempting to find a component from the Browser in the design, but it is obstructed by several other components. Which of the following Browser options will enable the engineer to focus on only the desired component?

Look At
Ground
Isolate
Remove all except selected

Error: Select 2 answers

21. What distinguishes the Component Color Swatch functionality from Component Color Cycling?

There is no difference, both have the same functionality
Component Color Swatch affects the colorization of components in the Design window and the Timeline while Component Color Cycling only affects the component-specific operations in the Timeline
Component Color Swatch only applies a colorization to component-specific operations in the Timeline while Component Color Cycling also affects the components in the Design window
Component Color Swatch changes the Physical Material of components while Component Color Cycling changes the Appearance of components

Error: Select 2 answers

22.
Which of the following joint types should be used to achieve the motion pictured for the bolt in the exhibit?

Cylindrical
Ball
Planar
Screw Helix

Error: Select 2 answers

23. A mechanical engineer is creating a complex sketch that contains a closed profile with several curved sketch entities such as splines and arcs. The engineer uses multiple lines to fully define the curved entities. When the engineer goes to extrude the closed profile, they are unable to select only the desired regions because of the overlapping lines that were used to define the splines and arcs. How can the engineer resolve this issue and correctly select a profile to extrude?

Fix the reference lines using the Fix/UnFix constraint
Add driven dimensions to the reference lines
Change the Selection mode to Paint Selection
Convert the reference lines to construction geometry

Error: Select 2 answers

24.
A mechanical engineer invites a collaborator to their project to inspect a design for additive manufacturability. The engineer requests that the collaborator verify that the internal cavities of the part can be manufactured on their additive machine. However, when the collaborator opens the file, they do not see any internal geometry. Which of the following tools can be used to inspect any internal geometry within the part?

Section Analysis
Draft Analysis
Accessibility Analysis
Deposition Analysis

Error: Select 2 answers

25.
Which of the following Browser options was used to modify the visual appearance of the bracket component?

All appearances for the component were removed
The component was grounded
The component was isolated
The component’s opacity was reduced

Error: Select 2 answers

26. A mechanical engineer wishes to create a ballooned drawing of their exploded view created in the Animation workspace. How can the engineer create the drawing?

In the Animation workspace, select Publish > Exploded View Drawing
Drawings cannot be made for exploded views, only single components, and assemblies
From the Workspace dropdown menu, select Drawing > From Animation
In the Design workspace, right-click the top-level component and select Create Drawing

Error: Select 2 answers

27.
For the assembly pictured in the exhibit, an engineer is looking to restrict the Slider joint motion of the annotated shaft. What workflow should be used to prevent the shaft from extending out past its desired boundaries?

Joints cannot be restricted
Capture the position of the shaft at its minimum, intermediate, and maximum locations to calibrate the joint
Edit the Joint Limits for the slider assigned to the shaft and assign a Minimum and Maximum distance within which the shaft can move
Ground the components connected to the shaft to prevent it from extending past them

Error: Select 2 answers

28. A mechanical engineer has spent significant time designing a part and realizes midway through their modeling process that the Front view should correspond to a different region of the model. How can the engineer correct this error?

Orient the model to the region corresponding to the actual Front view, right-click the View Cube, and select Set current view as > Front
Use the Look At option to orient the model to the correct region, then select the Front face of the View Cube to reassign it
This cannot be done; the engineer must restart the modeling process
Create a construction plane parallel to the correct region, right-click and select Set current plane as > Front

Error: Select 2 answers

29. A mechanical engineer has imported a model of a car bumper into Fusion 360. The model contains several connected surface bodies that the engineer would like to convert into a single solid body. What workflow can the engineer use to do this?

Stitch all the surface bodies together and use the Patch tool to create a single solid body
Stitch all the surface bodies together and use the Thicken tool to create a single solid body
This cannot be accomplished using the Surface toolset
Stitch all the surface bodies together and use the Convert to Solid tool to create a single solid body

Error: Select 2 answers

30. A mechanical engineer imports a bracket subassembly into a larger assembly for positioning and motion analysis. When the engineer applies a joint to a component in the smaller subassembly, only the selected component is correctly positioned while the remaining components remain in their original locations. How can this be resolved?

Individual Rigid joints must be created for all components within the subassembly before applying a joint with the larger assembly
Create a Rigid Group for the subassembly prior to adding it to the larger assembly and applying the joint
Ground the imported subassembly before applying the joint
Use the Freeze/UnFreeze tool on the entire subassembly to ensure they are joined

Error: Select 2 answers

31. Which of the following is a requirement to create a Turntable render for an assembly?

The animation for the Turntable render must first be created in the Animation workspace
The Turntable render can only be created from a previously rendered outcome in the Rendering Gallery
The Turntable render can only be created if a Motion Link for the rotation of the assembly is defined in the Design workspace
Turntable renders cannot be created for assemblies, only individual components, or bodies

Error: Select 2 answers

32.
Referring to the sketch in the exhibit, what sequence of selections could have been made to define symmetry constraints between the annotated geometry? Select all that apply.

Select 2 answers below.

A, E, B
A, D, E
D, A, E
C, E, B
B, E, C

Error: Select 2 answers

33.
A mechanical engineer is looking to perform a sweep operation for a circular profile along a curved path. The engineer would like to create the circular profile between the path and guide rail pictured in Figure A of the exhibit. How can the engineer get only the reference points for a 2-Point Circle on the active sketch plane, as shown in Figure B?

Use the Intersect tool to obtain the points at which the curved sketch profiles meet the active sketch plane
This cannot be done in the current active sketch plane; the points must have been added in the original curved profile sketches
Use the Intersection Curve tool to obtain the points at which the curved sketch profiles meet the active sketch plane
Use the Project tool to obtain the points at which the curved sketch profiles meet the active sketch plane

Error: Select 2 answers

34. An engineer is creating a Parts List for an assembly in the Drawing workspace but notices the Material column is incorrectly reporting the material for all components as Steel, despite the engineer already assigning the Appearances. Which of the following should be done?

The Physical Material, not the Appearance, should be assigned to the components
The Appearances should be reassigned in the Render workspace
Steel is a place holder material and the user must double-click it to modify it with the correct material
The components must be hidden in the Browser of the Design workspace; the visibility should be toggled on

Error: Select 2 answers

35. Which of the following options in the Scene Settings menu of the Render workspace can be used to toggle the shadow of model(s) in the design?

Ground Plane
Object Backdrop
Object Shadow
Shadows cannot be toggled off in the Scene Settings menu, only the Display Settings

Error: Select 2 answers

36. A mechanical engineer creates a drawing for a large assembly and places a Parts List table. The engineer notices that ballooned numbers are automatically populated on the associated view, but they are all incorrectly numbered. How can the engineer resolve this issue?

The engineer can launch the Renumber tool from the Tables menu and select the balloons in the proper sequence
The numbering is dependent on the order in which components were designed and cannot be modified unless the design is recreated in the appropriate order
The engineer can launch the Align Balloons tool from the Tables menu and select the balloons in the proper sequence
The engineer must double-click on the table in the Part Number column and type out the correct number associated to each component

Error: Select 2 answers

37.
A mechanical engineer is experimenting with creating a handle feature with the Rib tool. As pictured in the exhibit, what option in the Rib tool dialog distinguishes Feature A from Feature B?

Thickness Options > One Direction
Feature B cannot be created using the Rib tool
Depth Options > To Next
Depth Options > Depth

Error: Select 2 answers

Error: 37/37 questions unanswered

37/37 questions unanswered